dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body - Rear of Sunroof Not Flush With Roof|Page 160 > < Body - Rear of Sunroof Not Flush With Roof|Page 158
Page 3
background image

3. While supporting the sunroof assembly start the 12 attaching screws and tighten the attaching screws to 9 Nm (80 in. lbs.) using the sequence

shown.

4. Connect the electrical connector.

5. Connect the drain tubes to the sunroof(l).

6. Adjust the sunroof glass.  
7. Connect battery negative cable.
8. Install the vehicle headliner.

Body - Rear of Sunroof Not Flush With Roof|Page 160 > < Body - Rear of Sunroof Not Flush With Roof|Page 158