Magnum V6-2.7L VIN T (2007)
4. Reach into the back of the door shell to engage the exterior door handle latch release link (4) to the latch (2) lever and snap the plastic clip over the
link to secure it to the latch.
5. Reach into the back of the door shell to engage the end of the interior door handle latch release link (3) to the latch lever and snap the plastic clip
over the link to secure it to the latch.
6. Position the interior door latch lock link and knob unit (2) into the rear door (1).
7. Reach into the back of the door shell to engage the end of the interior door latch lock link to the latch lever and snap the plastic clip over the link
to secure it to the latch.
8. Reinstall the door glass channel and bracket to the inside of the rear door.
9. Reinstall the watershield onto the inside of the rear door.
10. Reinstall the trim panel onto the inside of the rear door.
11. Use a wrench inserted through the access slot on the outer latch face of the rear door shell to loosen the hex socket latch release adjusting screw
(2) on the latch (1).
12. Cycle the door outside latch release handle through its full travel two or three times.
13. Tighten the adjusting screw.
