Magnum V6-2.7L VIN T (2007)
19. Using an assistant, position the liftgate glass (2) over the liftgate glass opening and against the support spacers (1 and 3).
20. Using the grease pencil marks or tape as reference points, align the liftgate glass to the opening.
21. Carefully lower the liftgate glass onto the liftgate glass fence.
CAUTION: It is not possible to move the liftgate glass after installation. The liftgate glass should never be pressed into place by more than one
person, because the glass can break if pressed simultaneously on both sides.
22. Push the liftgate glass inward until the glass comes into contact with the spacers located on each side of the liftgate glass fence.
23. Connect the wire connectors to the rear window defogger terminals and, rear window mounted radio antenna, if equipped.
24. Install the liftgate trim panels.
25. Install the rear window wiper arm, if equipped.
