Magnum V6-2.7L VIN T (2007)
CAUTION: Use an appropriate tool (1) to remove piston seals (2) to avoid scratching piston bore. Do not use a screwdriver or other
metal tool to remove seals.
14. Using a soft tool such as a plastic trim stick (1), remove piston seals (2) from caliper bores.
15. Remove caliper bleeder screw (2) from caliper housing (1).
16. Clean piston bore and drilled passage ways with alcohol or a suitable solvent. Wipe it dry using only a lint-free cloth.
17. Inspect both piston and bore for scoring or pitting.
NOTE: It is not recommended to hone caliper bore. The anodized coating would be compromised.
Assembly
ASSEMBLY
CAUTION: Dirt, oil, and solvents can damage caliper seals. Ensure assembly area is clean and dry.
NOTE: Always use new, clean Mopar(R) DOT 3 Motor Vehicle Brake Fluid when assembling brake caliper.
NOTE: Never use old or used piston seals or boots for assembly.
