Magnum V6-2.7L VIN T (2007)
CAUTION: Ensure the hole in bearing half aligns with hole in connecting rod, as damage to engine may occur.
5. Position bearing onto connecting rod. Ensure that hole in bearing half is aligned to hole in connecting rod. Lubricate bearing surface with clean
engine oil.
6. Install Special Tools 8189 Connecting Rod Guides (3) into connecting rod.
7. The pistons (1) are marked on top with an arrow and with an "F" (Front) above the pin boss. These marks must be pointing towards the front of
engine on both cylinder banks.
