Magnum V6-2.7L VIN T (2007)
4. Position valve springs (3) and retainer (2) on spring seat (4).
5. Compress valve spring with a valve spring compressor.
6. Install retainer locks (1) and release tool.
7. If valves and/or seats are refaced, measure the installed height of springs (4). Measurement is taken from top of spring seat to the bottom surface of
spring retainer. If height is greater than 38.75 mm (1.5256 in.), install a 0.762 mm (0.030 in.) spacer in head counterbore under the valve spring
seat to bring spring height back within specification.
