Magnum V6-2.7L VIN T (2007)
Intake Manifold: Procedures
Manifold-Intake
INTAKE MANIFOLD UPPER
Check manifold for:
-
Damage and cracks
-
Gasket surface damage or warpage
-
Damaged or clogged EGR ports
If the manifold exhibits any damaged or warped conditions, replace the manifold. Clean EGR ports as necessary.
If a vacuum port is damaged, a repair procedure can be performed.
Intake Manifold Vacuum Port Repair
INTAKE MANIFOLD VACUUM PORT REPAIR
The composite intake manifold vacuum ports can be repaired. Although, if the manifold plenum chamber is damaged or cracked, the manifold must be
replaced.
To repair a broken or damaged vacuum nipple (port) on the composite intake manifold, perform the following procedure:
NOTE: While performing this procedure, avoid getting the manifold material residue into the plenum chamber.