Magnum V6-2.7L VIN T (2007)
TWO-TAB TYPE FITTING
This type of fitting is equipped with tabs located on both sides of the fitting. These tabs are supplied for disconnecting the quick-connect fitting from
component being serviced.
CAUTION: The interior components (O-rings, spacers) of this type of quick-connect fitting are not serviced separately, but new plastic
retainers are available. Do not attempt to repair damaged fittings or fuel lines/tubes. If repair is necessary, replace the complete fuel tube
assembly.
WARNING: The fuel system is under a constant pressure (even with the engine off). Before servicing any fuel system hoses, fittings or lines,
the fuel system pressure must be released. Refer to the fuel pressure release procedure in this group. This may result in personal injury or
death.
DISCONNECTION/CONNECTION
1. Perform fuel pressure release procedure. Refer to Fuel Pressure Release Procedure in this group.
