Magnum V6-2.7L VIN T (2007)
6. Unscrew at least one clockspring screw (1) but don't take it all the way out, This will help keep the clockspring from uncentering itself.
7. Back out the set screw (1) through the access hole (3) in the bottom of the Steering Column Control Module (SCCM) (2).
8. Pull the SCCM (1) off the steering column shaft.
9. To service the individual components contained within the SCCM, refer to Steering Column Control Module Disassembly.
Installation
INSTALLATION
WARNING:To service any component of the SCCM, the entire assembly must be removed from the column. This must be done due to the clockspring
passing through the assembly and into the self docking connector. Failure to remove the assembly could damage the pins of the clockspring
and prevent the airbag system from operating properly.
