dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Battery Cables - Removal|Page 7332 > < Battery Cables - Removal
Page 2
background image

1. Turn the ignition switch to the Off position. Be certain that all electrical accessories are turned off.

2. Remove the spare tire cover to gain access to the battery.

3. Disconnect and isolate the battery negative cable (3).

4. Remove the fastener (4) securing the battery negative cable to the body.

5. Remove the cable from the vehicle.

POSITIVE - BATTERY TO BULKHEAD

1. Turn the ignition switch to the Off position. Be certain that all electrical accessories are turned off.

2. Remove the spare tire cover to gain access to the battery.

3. Disconnect and isolate the battery negative cable (3).

4. Disconnect the battery positive cable (1).

Battery Cables - Removal|Page 7332 > < Battery Cables - Removal