Magnum V6-2.7L VIN T (2007)
4. Install axle assembly into vehicle.
5. Fill axle (1) with 600 ml (0.64 qts.) Mopar(R) 75W-90 Synthetic Gear Lubricant. Torque fill plug (1) to 30 Nm (22 ft. lbs.)
Removal
REMOVAL
1. Remove propeller shaft and heat shield.
2. Using Spanner Wrench 6958 (2), remove pinion flange nut.
3. Using Puller 1026 (1), remove pinion flange.
4. Remove pinion flange seal with suitable screwdriver and discard.