Magnum V6-3.5L VIN V (2006)
1. Check to be certain that the five spring nuts (1 and 2) are properly installed and in good condition on the inside of the door (3).
2. Check to be certain that the two plug grommets (2) are properly installed and in good condition on the inside of the door (1).
3. Position the trim panel (3) close enough to the inside of the door to reconnect the door wire harness connector (5) to the power window switch (4).
4. Reach between the top of the trim panel and the inside of the door shell to engage the end of the interior door handle latch release link (1) to the
handle lever (2) and snap the plastic clip over the link to secure it to the handle.
