Magnum V6-3.5L VIN V (2006)
2. If removed, attach anti-rattle clips (1) to upper and lower abutments of adapter (4).
3. Install NEW inboard (2) and outboard (3) brake pads on caliper adapter (4). NEW Inboard and outboard pads are interchangeable.
4. Push caliper guide pins into caliper adapter to clear caliper mounting bosses when installing.
5. Rotate caliper upward, aligning upper mounting boss with upper guide pin.
6. Install Upper caliper guide pin bolt (1). While holding guide pin (3) stationary tighten bolt to 31 Nm (23 ft. lbs.) torque.
7. Install tire and wheel assembly (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) torque.
8. Lower vehicle.
9. Pump brake pedal several times to set pads to caliper and brake rotor.
