Magnum V6-3.5L VIN V (2006)
D. CS (AWD and FWD) Engine Replacement
1.
Install the # 2 connecting rod cap and finger start the connecting rod bolts.
2.
Install the engine oil pan with four bolts and snug tight.
3.
Lower the vehicle.
4.
Remove engine trim cover.
5.
Disconnect the chassis fuel line from the engine fuel rail.
6.
Cap both open fuel lines.
7.
Drain the engine coolant from the vehicle and save for reuse.
8.
Disconnect the cruise control cable from the throttle body.
9.
Remove the cruise control solenoid and vacuum reservoir.
10.
Remove radiator shroud.
11.
Remove radiator core support.
12.
Remove radiator cooling fans.
13.
Remove upper radiator hose.
14.
Disconnect the air temp sensor located in the air cleaner box.
15.
Remove the air cleaner box (Figure 39).
16.
Remove the lower radiator hose.
17.
Disconnect the throttle cables from the throttle body and intake manifold.
18.
Disconnect all vacuum lines to the intake manifold.
19.
Disconnect the transaxle multi-pin electrical connector.
20.
Disconnect the transaxle output speed sensor.
21.
Disconnect the transaxle range sensor.
