Magnum V6-3.5L VIN V (2006)
b.
Install the front differential and tighten bolts to 47 ft. lbs. (64 N.m) (Figure 17).
c.
Remove the opening plugs from the differential.
d.
Align the propeller shaft to the differential flange to the mark made in Step 13(s). Install the four bolts and tighten to 47 ft. lbs. (64 N.m).
e.
Install the right strut to the lower control arm. Tighten the bolt to 84 ft. lbs. (114 N.m).
f.
Install the right tie rod end to the steering knuckle and tighten the nut to 60 ft. lbs. (81 N.m).
g.
Install the right axle shaft into the differential housing.
h.
Install the right axle shaft into the steering knuckle.
i.
Install the differential extension housing (left side of vehicle) to the engine oil pan and tighten bolts to 48 ft. lbs. (65 N.m) (Figure 18).
j.
Install the left strut to lower control arm and tighten bolt to 84 ft. lbs. (114 N.m).
k.
Install the left tie-rod end to the steering knuckle and tighten nut to 60 ft. lbs. (81 N.m).
l.
Install axle shaft into the differential extension housing.
m.
Install axle shaft into the steering knuckle.
