Magnum V6-3.5L VIN V (2006)
49.
Install a new engine oil filter.
50.
Lower the vehicle.
51.
Install the serpentine belt.
52.
Inspect the dipstick tube "O" ring for damage. If damaged, install a new "O" ring (PN 05003905AA).
53.
Install dipstick tube into the engine oil pan and tighten the mounting bolt to 30 in. lbs. (41 N.m).
54.
Connect the battery.
55.
Install 5-1/2 quarts of new 10W30 oil into the engine.
56.
Start the engine.
57.
Check for oil leaks.
58.
Raise the engine rpms several times to align the air conditioning compressor to the serpentine belt.
59.
Raise the vehicle while the engine is idling.
60.
Carefully tighten ONLY THE LOWER TWO air conditioning compressor bolts to 200 in. lbs. (23 N.m).
WARNING:
Keep hands and tools away from the moving serpentine belt while tightening the air conditioning compressor mounting bolts.
61.
Lower the vehicle and turn off the ignition.
62.
Raise the vehicle and torque the four bolts to the air conditioning compressor to 200 in. lbs. (23 N.m).
63.
Install the right wheel well lower splash shield.
64.
Lower the vehicle.
65.
Install engine trim cover.
66.
Return vehicle to the customer.
C. LX (AWD and RWD) Engine Replacement
1.
Install the # 2 connecting rod cap and finger start the connecting rod bolts.
2.
Install the engine oil pan with four bolts and snug tight.
3.
Lower the vehicle.
4.
Remove the cowl grill push pins.
