Magnum V6-3.5L VIN V (2006)
16.
Install rocker arm and shaft assembly, refer to the service information available in TechCONNECT group 9 - Engine/Cylinder Head/Rocker Arm /
Adjuster assembly - Installation.
17.
Install cylinder head cover(s), refer to the service information available in TechCONNECT group 9 - Engine/Cylinder Head/Cylinder Head
Cover(s) - Installation.
18.
Install upper intake manifold, refer to the service information available in TechCONNECT group 9 - Engine/Manifolds/Intake Manifold -
Installation. When complete, proceed to MAP Sensor Inspection.
MAP SENSOR INSPECTION
1.
Inspect the MAP sensor (Fig. 2) for LX models or (Fig. 3) for CS models.
a.
If the MAP sensor is the new style, no further action is necessary for the MAP sensor. Proceed to Decarboning Combustion Chamber and
Valves.
