Magnum V6-3.5L VIN V (2006)
20. Align the paint marks and install the front drive shaft.
21. Install the front drive shaft heat shield (4).
22. Install the left front drive axle intermediate shaft housing (3) and support bracket. Tighten fasteners to 25 Nm (19 ft. lbs.).
23. Connect the power steering hoses to the steering rack.
24. Install the left front drive axle (2).
25. Install the right front drive axle (2).
26. Lower the vehicle.
28. Fill engine crankcase with the proper oil to the correct level.
29. Fill the cooling system.
30. Fill the power steering.
31. Connect the negative battery cable.
