Magnum V6-3.5L VIN V (2006)
9. Remove the push-pin retainer (1) that secures the fresh air inlet housing (2) to the passenger side inner fender (6).
10. Disengage the wire harness retainer (3) from inside the bottom of the fresh air inlet housing, if equipped.
11. Remove the push-pin retainer (5) that secures the insulator (4) to the front of the fresh air inlet housing and position the insulator out of the way.
12. Remove the two nuts (1) that secure the fresh air inlet housing (4) and water separator (2) or particulate air filter (6) and filter housing (5)
(depending on application) to the dash panel (3).
13. Remove the fresh air inlet housing and water separator or particulate air filter and filter housing (depending on application) as an assembly from
the dash panel.
INSTALLATION
