Magnum V6-3.5L VIN V (2006)
-
Auto shutdown (ASD) sense
-
Battery temperature
-
Battery voltage
-
Brake switch
-
J1850 bus circuits
-
Camshaft position sensor signal
-
Crankshaft position sensor
-
Data link connections for scan tool
-
Engine coolant temperature sensor
-
Five volts (primary)
-
Five volts (secondary)
-
Fuel level
-
Generator (battery voltage) output
-
Ignition circuit sense (ignition switch in on/off/crank/run position)
-
Intake manifold air temperature sensor
-
Leak detection pump (switch) sense (if equipped)
-
Manifold absolute pressure (MAP) sensor
-
Oil pressure
-
Overdrive/override switch
-
Oxygen sensors
-
Park/neutral switch (auto. trans. only)
-
Power ground
-
Sensor return
-
Signal ground
-
Speed control multiplexed single wire input
-
Throttle position sensor
-
Transmission governor pressure sensor
-
Transmission temperature sensor
-
Vehicle speed (from ABS module)
NOTE: PCM Outputs:
-
A/C clutch relay
-
Auto shutdown (ASD) relay
-
J1850 (±) circuits for: speedometer, voltmeter, fuel gauge, oil pressure gauge/lamp, engine temp. gauge and speed control warn. lamp
-
Data link connection for scan tool
-
EGR valve control solenoid (if equipped)
-
EVAP canister purge solenoid
-
Fuel injectors
-
Fuel pump relay
-
Generator field driver (-)
-
Generator field driver (+)
-
Generator lamp (if equipped)
-
Ignition coil
-
Natural Vacuum Leak detection Switch
-
Malfunction indicator lamp (Check engine lamp). Driven through J1850 circuits.
-
Overdrive indicator lamp (if equipped). Driven through J1850 circuits.
-
Oxygen sensor heater relays (if equipped).
-
Radiator cooling fan relay (pulse width modulated)
-
Speed control source
-
Speed control vacuum solenoid
-
Speed control vent solenoid
-
Tachometer (if equipped). Driven through J1850 circuits.
-
Transmission converter clutch circuit
-
Transmission 3-4 shift solenoid
-
Transmission relay
-
Transmission temperature lamp (if equipped)
-
Transmission variable force solenoid
5 VOLT SUPPLIES
Primary 5-volt supply:
-
supplies the required 5 volt power source to the Crankshaft Position (CKP) sensor.
-
supplies the required 5 volt power source to the Camshaft Position (CMP) sensor.
-
supplies a reference voltage for the Manifold Absolute Pressure (MAP) sensor.
-
supplies a reference voltage for the Throttle Position Sensor (TPS) sensor.