Magnum V6-3.5L VIN V (2006)
2. Install throttle body and bolts.
3. Tighten bolts to 11.9 N.m (105 in. lbs.) torque.
4. Install the throttle body support bracket to the bottom of the throttle body. Tighten the bolts to 27.1 N.m (20 ft. lbs.) torque.
5. Install inlet hose and tighten clamp.
6. Connect negative cable to battery.
7. A Scan Tool may be used to learn electrical parameters. Go to the Miscellaneous menu, and then select ETC Relearn. If the relearn is not
preformed, a Diagnostic Trouble Code (DTC) will be set. If necessary, use a scan tool to erase any Diagnostic Trouble Codes (DTC's) from PCM.
