Magnum V6-3.5L VIN V (2006)
Engine Control Module: Service and Repair
Powertrain Control Module
POWERTRAIN CONTROL MODULE
USE THE SCAN TOOL TO REPROGRAM THE NEW POWERTRAIN CONTROL MODULE (PCM) WITH THE VEHICLES ORIGINAL
IDENTIFICATION NUMBER (VIN) AND THE VEHICLES ORIGINAL MILEAGE. IF THIS STEP IS NOT DONE, A DIAGNOSTIC TROUBLE
CODE (DTC) MAY BE SET.
REMOVAL
To avoid possible voltage spike damage to PCM, ignition key must be off, and negative battery cable must be disconnected before unplugging PCM
connectors.
1. Disconnect negative battery cable.
2. Remove PCM bracket-to-body mounting bolt.
3. Remove assembly from vehicle.
4. Unlock and disconnect the electrical connectors from PCM.