Magnum V6-3.5L VIN V (2006)
Power Seat Switch: Testing and Inspection
POWER SEAT SWITCH
DRIVER WITHOUT MEMORY SEAT SYSTEM
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat.
Driver Power Seat Switch Without Memory Seat System Continuity
3. Use an ohmmeter to test the continuity of the power seat switch. Refer to DRIVER POWER SEAT SWITCH WITHOUT MEMORY SEAT
SYSTEM CONTINUITY table. If not OK, replace the faulty power seat switch. If switch tests OK, refer to testing.
PASSENGER SEAT
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat.
