Magnum V6-3.5L VIN V (2006)
7. Install return hose (1) to steering gear (2). Tighten tube nut to 47 Nm (35 ft. lbs.) torque.
8. Align splines and install steering coupling to steering gear shaft. Install NEW pinch bolt. Tighten bolt to 54 Nm (40 ft. lbs.) torque.
9. Install each outer tie rod (2) end to its knuckle (3). Install nut (1) and tighten to 85 Nm (63 ft. lbs.) torque.
10. Install tire and wheel assemblies (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) torque.
11. Lower vehicle.
12. Connect battery negative cable (2) to battery post. It is important that this is performed properly.
13. Fill pump reservoir with fluid and perform pump initial operation procedure.
14. Perform wheel alignment setting toe to specifications.