Magnum V6-3.5L VIN V (2006)
7. Slide clevis bracket (2) over bushing mounted in lower control arm (7).
8. Install bolt (1) and nut (3) attaching shock clevis bracket (2) to lower control arm (7). Do not tighten at this time.
9. Tighten pinch bolt (1) attaching clevis bracket to shock assembly to 61 Nm (45 ft. lbs.) torque.
10. Slide stabilizer link ball joint stem into clevis bracket. Install nut (2) fastening link to clevis bracket (3). Tighten nut by holding ball joint stud
while turning nut. Tighten nut using crow foot wrench on torque wrench to 128 Nm (95 ft. lbs.) torque.
