Magnum V6-3.5L VIN V (2006)
Seals and Gaskets: Service and Repair
Front Axle - 175 FIA
Seal-Axle Shaft
SEAL-AXLE SHAFT
REMOVAL
REMOVAL - RIGHT AXLE SEAL
1. Remove right halfshaft assembly.
2. Using suitable screwdriver, remove axle seal (1).
REMOVAL - LEFT AXLE SEAL
NOTE: Inboard (Left) axle seal replacement requires removal and disassembly of the axle assembly.
1. Remove front axle assembly.
2. Drain axle lubricant by turning housing on its side and draining out of left output bore.
3. Remove differential cover (5) and differential (3). Remove and discard O-ring seal.
4. Using Tool 9664 and Slide Hammer C-637, remove left axle seal.
INSTALLATION
INSTALLATION - RIGHT AXLE SEAL