dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Speaker - Removal|Page 10000 > < Speaker - Removal|Page 9998
Page 3
background image

NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection.

1. Connect electrical harness connector and position speaker.
2. Install and tighten mounting fasteners.
3. Install the speaker grille trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Quarter Panel Trim/Quarter Trim

Speaker Bezel - Installation.

4. Connect the battery negative cable.

SUBWOOFER - REAR SHELF

NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection.

1. Connect electrical harness connector and position subwoofer.
2. Install and tighten mounting fasteners.
3. Install the rear shelf trim See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair/Installation.
4. Install the lower C-pillar trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim

Panel-Installation.

5. Install the upper C-pillar trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim

Panel-Installation.

6. Connect the battery negative cable.

SUBWOOFER - SEDAN

Speaker - Removal|Page 10000 > < Speaker - Removal|Page 9998