Magnum V8-5.7L (2008)
5. Partially lower the vehicle and remove the push-pin retainers (2) (four-sedan, six-wagon, eight-Charger) that secure the front fascia assembly to the
upper radiator support.
6. If equipped, disconnect the headlamp washer system hose from washer reservoir.See: Wiper and Washer Systems/Headlamp Washer Spray
Nozzle/Service and Repair/Headlamp Washer - Removal
7. On all three SRT8 models, disconnect the Tire Pressure Monitoring System connector. See: Instrument Panel, Gauges and Warning Indicators/Tire
Monitoring System/Tire Pressure Monitor Receiver / Transponder/Service and Repair/TPM Transponder - Removal
8. Carefully pull the front fascia assembly forward to disengage the push-pin retainer (6) from the slot in each side the fascia and position the fascia
to gain access to the fog lamp wire harness connectors (3), if equipped.
Charger
1. Remove the screw (6) that secures the front fascia assembly (5) to the nut insert (1) in each front fender.
2. Partially lower the vehicle and remove the push pin retainer (4) (four-sedan, six-wagon, eight-Charger) that secure the front fascia assembly to the
upper radiator support.
3. Carefully pull the front fascia assembly forward to disengage the fastener (6) from the slot in each side the fascia and position the fascia to gain
access to the fog lamp wire harness connectors (7), if equipped.
4. If equipped, disconnect each fog lamp wire harness connector (1) from the headlamp wire harness (2) and remove the front fascia assembly (3)
from the vehicle.
5. If equipped and if required, remove the fog lamps from the front fascia assembly See: Lighting and Horns/Fog/Driving Lamp/Service and
Repair/Fog Lamp - Removal.
6. If required on SRT8 models, remove the lower fascia from the front fascia assembly and discard the metal retaining clips.
