Magnum V8-5.7L (2008)
Rear Shelf: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the right and left lower and upper C-pillar trim from the vehicle. See: Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim
Panel-Removal.
3. Remove the nut that secures the center rear seat belt lower anchor to the stud on the floor panel and feed the seat belt webbing back through the
opening in the top of the rear shelf panel trim (2) to the retractor.
4. Remove the push-pin fastener (1) that secures the trim to the rear shelf panel (3).
5. Slide the trim forward to disengage the S-clip that secures the underside of the trim to the center of the shelf panel.
6. Remove the trim from the rear shelf panel.
