Magnum V8-5.7L (2008)
9. Install the horns onto the headlamp mounting crossmember. Tighten the bolts to 28 Nm (21 ft. lbs. ).
10. Connect the headlamp wire harness to the horns.
11. Install the headlamp units (1) See: Lighting and Horns/Service and Repair/Front Lamp Unit - Installation.
12. Install the front fascia See: Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Front Fascia - Installation.
13. Reconnect the negative battery cable.
14. Carefully close the hood and verify hood latch and panel alignment. Adjust as necessary.
15. If equipped with ACC (Adaptive Cruise Control), module must be realigned. See: Cruise Control/Cruise Control Module/Service and
Repair/Procedures
