Magnum V8-5.7L (2008)
-
Broken or missing shear pin (3)
If any one or more of these symptoms exist replace the height adjuster assembly. Do not attempt any repairs. Failure to follow these
instructions may result in personal injury or death.
FRONT TILT MOTOR
1. Position motor (1) on seat adjuster (2).
2. Install the fasteners (1) holding the motor to the seat adjuster (2). Tighten the screws to 5 Nm (44 in. lbs.).
3. Connect the motor electrical connector.
4. Install the seat cushion See: Seat Cushion/Service and Repair/Seat Cushion / Cover - Installation.
5. Clip the wire harness to cushion pan.
