dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body and Frame|Unibody > < Decklid Spoiler|Page 11653
Page 3
background image

7. Starting on the drivers side, locate the end of spoiler 5mm (3/16 in.) from edge of deck lid, immediately below the corner radius. HOLD THE

OPPOSITE END OF THE SPOILER AWAY FROM THE VEHICLE.  Making sure the spoiler remains level with the upper character line of
the deck lid, slowly apply the tape on the spoiler to the deck lid, working from the drivers side to the passenger side of the vehicle while pulling off
the remaining backing paper as the spoiler installation progresses.

8. Apply heavy hand pressure all along the spoiler to establish good tape adhesion between the spoiler and deck lid.
9. Check the edges of the spoiler to verify good tape adhesion. Apply more pressure if necessary.

Body and Frame|Unibody > < Decklid Spoiler|Page 11653