Magnum V8-5.7L (2008)
5. RWD - Remove two bolts (2) securing disc brake caliper and adapter (3) to knuckle (1).
6. RWD - Remove disc brake caliper and adapter (3) from knuckle (1) as an assembly. Hang assembly out of way using wire or a bungee cord. Use
care not to overextend brake hose when doing this.
7. Remove any clips (3) retaining brake rotor (2) to wheel studs.
8. Slide brake rotor (2) off hub and bearing (1).
Rear
REAR
NOTE: Before proceeding, See: Service Precautions/Brakes - Caution.
1. Raise and support vehicle. See: Maintenance/Vehicle Lifting/Service and Repair
