Magnum V8-5.7L (2008)
6. Remove the lower and upper caliper mounting bolts (1).
7. Remove brake caliper (2) with pads from knuckle and brake rotor. Hang assembly out of way using wire or a bungee cord. Use care not to
overextend brake hose when doing this.
8. Remove any clips (3) retaining brake rotor (2) to wheel mounting studs.
9. Slide brake rotor (2) off hub and bearing (1).
Front
FRONT
NOTE: Inspect brake pads before installation. See: Brake Pad/Service and Repair/Procedures/Brake Pads - Inspection
