Magnum V8-5.7L (2008)
1. Clean hub (1) face to remove any dirt or corrosion where brake rotor mounts.
2. Install brake rotor (3) over wheel mounting studs and onto hub (1).
3. Install disc brake caliper and adapter assembly (3) over brake rotor.
4. Install mounting bolts (1) securing caliper adapter (3) to knuckle (2). Tighten bolts to 115 Nm (85 ft. lbs.).
5. Install tire and wheel assembly (1) See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels -
Installation. Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)).
