Magnum V8-5.7L (2008)
10. Connect battery negative cable (2) to battery post. It is important that this is performed properly. See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery Reconnection
11. Bleed (1) base brake hydraulic system as necessary. See: Brake Bleeding
CAUTION: If NEW brake pads have been installed, keep in mind that braking effectiveness might be somewhat reduced during the first
brake applications.
12. Road test vehicle making several stops to wear off any foreign material on brakes and to seat brake pads. If NEW brake pads are installed, they
need to be properly burnished. See: Disc Brake System/Brake Pad/Service and Repair/Procedures/Brake Pads - Brake Pad Burnishing
