dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Brake Fluid Level Sensor/Switch > < Maintenance - Fluid Flushing Information|Page 6499
Page 1
background image

Brake Fluid: Service and Repair

BRAKE FLUID LEVEL CHECKING

Check master cylinder reservoir fluid level a minimum of twice annually.

Fluid reservoirs (1) are marked with the words MAX and MIN to indicate proper brake fluid fill level of the master cylinder.

If necessary, add brake fluid to bring the level to the bottom of the MAX mark on the side of the master cylinder fluid reservoir (1).

Use only Mopar(R) brake fluid or equivalent from a sealed container. Brake fluid must conform to DOT 3 specifications 

DO NOT  use brake fluid with a lower boiling point, as brake failure could result during prolonged hard braking.

Use only brake fluid that was stored in a tightly-sealed container.

DO NOT  use petroleum-based fluid because seal damage will result. Petroleum based fluids would be items such as engine oil, transmission fluid, 
power steering fluid etc.

Brake Fluid Level Sensor/Switch > < Maintenance - Fluid Flushing Information|Page 6499