Magnum V8-5.7L (2008)
CAUTION: When removing fluid reservoir from the master cylinder, do not pry off using any type of tool. This can damage the fluid
reservoir or master cylinder housing.
5. Remove screw (3) fastening fluid reservoir to master cylinder housing.
6. Rock the brake fluid reservoir side-to-side while pulling up to remove it from seal grommets in master cylinder housing.
7. Remove two brake fluid reservoir seal grommets (2) from master cylinder housing (1).
Installation
INSTALLATION
1. Install NEW brake fluid reservoir sealing grommets (2) in master cylinder housing (1).
