Magnum V8-5.7L (2008)
1. Raise vehicle on hoist.
2. Hoist vehicle.
WARNING: The normal operating temperature of the exhaust system is very high. therefore, never work around or attempt to service
any part of the exhaust system until it is cooled. special care should be taken when working near the catalytic converter. The temperature
of the converter rises to a high level after a short period of engine operation time.
3. Disconnect downstream oxygen sensor electrical connectors.
4. Remove muffler and resonator assemblySee: Muffler/Service and Repair/Muffler - Removal.
5. Remove ball flange nuts.
6. Remove catalytic converter ball flange nut.
7. Remove catalytic converter.
Right Hand Catalytic Converter
RIGHT HAND CATALYTIC CONVERTER
1. Install catalytic converter (3) onto exhaust manifold ball flange. Only finger tighten nuts at this time.
2. Install muffler and resonator assembly See: Muffler/Service and Repair/Muffler - Removal.
