Magnum V8-5.7L (2008)
13. Select "Download to Scantool".
14. Select "Close after the download is complete, then select "Back".
15. Select "Update Controller". Follow the on screen instructions.
16. When the Radio update is complete, select "OK".
17. Verify that the part number changed at the top of the "Flash Radio" screen.
18. Verify proper operation of the Radio.
NOTE:
Due to the Radio programming procedure, a DTC may be set in other modules (TCM, BCM, SKREEM, etc.) within the vehicle, if so equipped.
Some DTC's may cause the MIL to illuminate. From the "Home" screen select "System View". Then select "All DTCs". Press "Clear All Stored
DTCs" if there are any DTCs shown on the list.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
