dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Wheel Alignment|Page 1865 > < Wheel Alignment|Page 1863
Page 8
background image

CAUTION: Do not twist the inner tie rod-to-steering gear boots during front wheel Toe adjustment. Remove the boot clamps (2) at the inner tie
rods and make sure the boots move freely on the inner tie rods.

12. AWD - Loosen the jam nut (1) at the inner-to-outer tie rod (3-4) connection.

13. RWD - Loosen the jam nut (3) at the inner-to-outer tie rod (4-5) connection.

14. Grasp the inner tie rod at the hex and rotate as necessary to adjust front toe to the preferred toe specification.  See: Specifications

Wheel Alignment|Page 1865 > < Wheel Alignment|Page 1863