Magnum V8-5.7L (2008)
7. Remove the one air bag retaining (2) screw from the inboard side of the seat back frame.
8. Slide the air bag (1) from the bottom of its protective cover.
Installation
INSTALLATION
1. Carefully slide the seat airbag (1) into the nylon pouch (2) integral to the outboard side of the front seat back. Make sure the locating tab on the
upper portion of the air bag locks securely into the side of the seat frame, then secure the air bag to the seat frame using air bag retaining screw.
2. Position the seat airbag and trim (2) cover as a unit to the outboard side of the seat back frame and install the attaching fasteners (3) and reposition
the foam (1).
