Magnum V8-5.7L (2008)
Impact Sensor: Service and Repair
Installation
INSTALLATION
FRONT IMPACT SENSOR
1. Position the front impact sensor in the correct mounting location and install the two mounting screws (2). Torque screws (2) to 7 Nm (62 in. lbs.).
2. Connect the electrical connector (3).
NOTE: If replacing the left front impact sensor, the air intake system needs to be installed.
WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.
SIDE IMPACT SENSOR
B-PILLAR MOUNTED SIDE IMPACT SENSOR
1. Position the B-pillar mounted impact sensor in the correct mounting location and install the two mounting screws (2). Torque screws (2) to 7 Nm
(62 in. lbs.).
2. Connect the electrical connector (1).
3. Install the B-pillar trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim.
WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.
C-PILLAR MOUNTED SIDE IMPACT SENSOR
