Magnum V8-5.7L (2008)
5. Install the front passenger seat See: Body and Frame/Seats/Service and Repair/Seat - Installation
WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.
WARNING: Following successful completion of the Airbag System test procedure, the Occupant Classification System Verification Test must
be done using a scan tool and the appropriate diagnostic information.
POWER FRONT PASSENGER SEAT
NOTE: If the vehicle is equipped with a power front passenger seat, to remove the adjuster from the riser it is necessary to have battery power
to move the seat forward and rearward to access the mounting bolts.
1. Position the seat weight sensor onto passenger front seat riser.
2. Install the two nuts (2) holding the seat weight sensor (4) to the seat riser. Torque nuts to 40 Nm (30 ft. lbs.).
3. Connect the one electrical connector (1).
