Magnum V8-5.7L (2008)
Power Door Lock Switch: Service and Repair
Removal
REMOVAL
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection.
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Trim Panel/Removal.
3. Using a flat bladed tool, remove the window/lock switch (2) from the door trim panel.
