Magnum V8-5.7L (2008)
WARNING: Before servicing the steering column the airbag system must be disarmed. Refer to restraint system for service procedures. Failure
to do so may result in accidental deployment of the airbag and possible serious personal and/or fatal injury may result.
NOTE: Position the front wheels straight-ahead.
1. Fully extend or pull out adjustable steering column.
2. Disconnect and isolate negative battery cable at battery.
3. Remove the driver airbag (3), See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Driver Airbag - Removal.
4. Remove steering wheel retaining bolt (2), then slide the steering wheel (1) off the shaft.
CAUTION: DO NOT fully remove all the clockspring T10 Torx screws. Leave one clockspring T10 Torx screw in position. This is necessary to
keep the clockspring centered.
5. Unscrew at least one clockspring T10 Torx screws (1) but don't take it all the way out, This will keep the clockspring centered onto itself.
