Magnum V8-5.7L (2008)
Power Window Switch: Service and Repair
Removal
REMOVAL
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection.
1. Disconnect and isolate the battery negative cable.
2. Remove rear door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door
Trim Panel/Removal.
3. Remove switch (1) from door trim panel (2).
