Magnum V8-5.7L (2008)
5. Remove screw (1) fastening wheel speed sensor (2) to knuckle (4). Pull sensor head (4) out of knuckle.
6. Access and remove front brake rotor. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Removal
7. Remove nut (1) from outer tie rod end (2) stud.
8. Using Puller (2), Special Tool 9360, separate tie rod stud (1) from knuckle.
9. Loosen nut (4) attaching lower control arm ball joint stud to knuckle (3). Back nut off until nut is even with end of stud. Keeping nut on at this
location will help keep end of stud from distorting while using Puller in next step.
