Magnum V8-5.7L (2008)
6. 3.0L Diesel Engine - Unthread tube nut, then remove pressure hose (2) from pump (1).
7. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
8. Remove belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal
9. Remove screws (2) securing pressure hose (1) routing clamp to engine cradle.
10. Remove screw (7) securing pressure hose (1) routing clamp to engine cradle.
11. Unthread pressure hose tube nut (5) from steering gear.
12. Remove pressure hose (1) from vehicle.
Return Hose - Cooler To Reservoir
COOLER TO RESERVOIR
1. Disconnect and isolate battery negative cable (2) from battery post.
2. Siphon power steering fluid from pump reservoir.
