Magnum V8-5.7L (2008)
Control Arm: Service and Repair
Front Upper Control Arm - Removal
REMOVAL
1. If removing left upper control arm, remove and reposition coolant recovery container. See: Engine, Cooling and Exhaust/Cooling System/Coolant
Reservoir/Service and Repair/Coolant Recovery Container - Removal
2. If removing right upper control arm, remove IPM from mount and reposition. See: Power and Ground Distribution/Power Distribution
Module/Service and Repair/Removal
3. If equipped, remove front shock tower cap (1) from top of shock assembly (4).
4. Remove three nuts (2) fastening shock assembly (4) to shock tower (3).
5. Remove nuts (2) from upper control arm mounting bolts (1).
6. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
